Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for Kimber 1911 Fixed
Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for Kimber 1911 Fixed
DESCRIPTION
Mounting Hardware is Included
This Mount Fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.604"
- Overall Width: .99"
- Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
- Vortex Defender Series
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 407k-GR
- Holosun 507K*
- Holosun 507k-GR
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
More Images
Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for Kimber 1911 Fixed
DESCRIPTION
Mounting Hardware is Included
This Mount Fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.604"
- Overall Width: .99"
- Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
- Vortex Defender Series
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 407k-GR
- Holosun 507K*
- Holosun 507k-GR
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DESCRIPTION
Mounting Hardware is Included
This Mount Fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.604"
- Overall Width: .99"
- Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
- Vortex Defender Series
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 407k-GR
- Holosun 507K*
- Holosun 507k-GR
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
