Trijicon RMR / SRO, Holosun 407c / 507c Mount for Kimber 1911 Fixed
DESCRIPTION
Mounting Hardware is Included
This mount fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
More Images
Trijicon RMR / SRO, Holosun 407c / 507c Mount for Kimber 1911 Fixed
DESCRIPTION
Mounting Hardware is Included
This mount fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DESCRIPTION
Mounting Hardware is Included
This mount fits:
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G*
- Desert Eagle 1911C*
This mount does not fit:
- Kimber Micro
- Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*
SPECIFICATIONS
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
